Additional Options

Fiber Laser Machines

This fiber laser gives a repeatable precision range of +-0.0001" with beam quality lower than 1.1 M2.

The laser used is a pulsed fiber laser with a wavelength of 1064 nm. It has an estimated lifetime of 25,000+ hours.

1000W/2000W/3000W fiber laser cutter is used for cutting metal parts, arts, crafts, signs, signage, logos, letters, texts, kitchenware, and more sheet metal fabrication plans. Now the best fiber laser metal cutter for sale at cost price.

Boss Laser provides technical support through engineers and technicians for customers for life.

Fiber Laser Cutting Machine Application

Fiber Laser Cutting Machine Application

The 30W fiber-laser can engrave in stainless steel at a angle of 90 degrees and at speeds of up to 3,543 ipm. This laser uses 100% of its power.

Triumph's 30-W desktop fiber laser can be used to create two lenses. The first gives you a 4.3 inch x 4.3 inch engraving area and the second gives you a 7.8 inches x 7.8".

Fiber Laser Printing Machine

You can mount Muse Pandora under an adjustable work desk, as shown below, for effective engraving when using such lenses.

Fiber lasers are solid state lasers. However, they are very different from diode and fiber lasers. This is because of the difference in their capabilities.

Fiber Laser Printing Machine

Fiber Lasers Machinery Quotes

MOPA fiber-laser, a special type that uses fiber lasers for color laser engravings of metals, has a greater pulse width and frequency control.

FSL Muse Pandora, 20W, can deep engrave Silver at a speed of 708 IPM using 100% laser power.

Control Unit

The laser arm can be held by the support columns (Z-axis). The Z-axis can be moved using the height adjustment knob to adjust the laser focus.

Finally, the laser beam will be projected onto the work material and is focused at the cutting head.

Fiber Laser Printing Machine

Check our other pages :

Fiber Laser Cutting Machine 750w

They offer a 30-day refund policy and a two-year parts warranty for all components and the FM-Desktop's fiber laser.

Plasma can cut anything that's conductive. This basically means that it can cut all types of metals. Plasma can cut any reflective metal, such as brass, copper and aluminum (which laser machines cannot do).

Fiber Laser Machines

Frequently Asked Questions

Compressed air, nitrogen, oxygen, and argon are the four primary types of assist gas for fiber laser machines.

In fact, the diode module in a fiber laser typically outlasts other technologies by three times. Most lasers have a lifespan of about 30,000 hours, which equates to about 15 years of use. Fiber lasers have an expected life of 100,000 hours, which equates to 45 years of use.

Applications for the 50 Watt Fiber Laser Deep Engraving Machine:

Thin metals such as stainless steel, aluminum, alloy, brass, silver, gold, and titanium can also be cut by the deep laser engraving machine.