Beam Layout Welder Job Description

Beam Layout Welding Temperature


The operator moves the beam to its starting position by using the "IN" conveyor and presses the "START” button. The entire sequence of operations will be automated, which includes positioning the welding heads and moving the beam at the right speed, starting and stopping the welding process on stationary and mobile sides, activating copper back-up assemblies, pressure cylinders and activating web holding.




The flux recovery system allows you to recover and dispense welding flux. Seam Welder Hydraulic Power Units (also known as Electric Controls) drive the conveyors at entry and exit.

Sheet


This platform has rail guards for safety and stairs to make it easy to access. The platform is designed to store flux and wire. This allows for easy access for the operator to load flux and reels, as well as change drums and reels. You can increase the productivity, speed, and ability of your Beam Layout Welding operation by adding auxiliary equipment, such as PHI's Flange Turning Device and Beam Turning Device.

Sheet
Beam Layout Welding Yard

Beam Layout Welding Yard


The Conveyor System allows continuous beam production by connecting the Beam Layout Weldings, Tacking Fixture, and Automatic Welder. The Conveyors can be found at the entrance and exit to Seam Welder's Tacking Fitture, Automatic Welder, or Seam Welder. They are hydraulically controlled. The control stations at each station determine the direction, speed, and movement of adjacent conveyors.

Beam Layout Welding Cap


Gulf States Saw & Machine Company, the largest distributor of metal fabrication & robotic welding in the South. Since over 30 years, we have been committed to providing the best technology and top-quality service.

Beam Layout Welding Program

Beam Layout Welding Program



The tacking fixture can be used to assemble the beam before it is sent to the Main welder. The web is brought in from the seam welded and flange storage racks. They are then moved to the tacking fixture where they are placed before tacking the beam's leading edge. A manual operator can load the flanges on conveyors, or an automated process using PHI’s flange-loading Gantry.

Beam Layout Welding Titanium




The application of beam layout welding and H-beams is very different. However, it's not restricted to what it can be used for. These are just a few factors that can help you tell if an H beam is an I beam.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.