It will roll in one direction. Weld the side fuse so that the head is in the right place and the flanges on the center web. For a more secure weld onto your web, the flanges will be double-joined in most cases.


D3 Touch from Welding Alloys allows you to control your welding process and tools using touch screens. Welding Alloys has integrated new technology into all Welding Alloys machinery, increasing performance and accuracy. This technology enhances precision engineering mechanics, resulting in maximum performance for our welding machines.

Beam Layout Welding Defects



As Gulf States Saw & Machine Company, our specialty is robotic welding plus different Industrial applications for Robotics such as Machine Tending and Material Handling. The Atlanta Technology Center serves as headquarters for Capital Robotics but we also maintain systems and conduct customer training in Dallas. Capital has consistently expanded technical staff members including welding engineers, application engineers, and service engineers.

Beam Layout Welding Defects
Beam Layout Welding Seminar Report

Beam Layout Welding Seminar Report






The tacking fixture is used for assembly of the beam before the Main Welder. The web and the flanges are taken from the seam welder or flange storage racks, and then transported to the tacking fixture. The conveyors can be loaded manually or automatically by an operator using PHI's Flange-loading Gantry.

Beam Layout Welding Heat Affected Zone


A typical Beam Layout welding system comprises 18 conveyor sections. Six of them are motorized, driving the rollers through sprockets as well as chains. Ten of them are connected via chains to motorized sections adjacent. Two are inactive.

Beam Layout Welding Used To Emit Light

Beam Layout Welding Used To Emit Light


Try standing in the middle of the plywood while it's still there. It may not be possible to lift it off the plywood. You can add strength and support by placing one strip of Styrofoam under the plywood and another layer of plywood below it.

Beam Layout Welding On A Car







An H beam's flanges are usually thicker than the normal, so they can be used in applications that need to support heavier and larger weights. The flanges on I beams are also inclined, which is why they were labeled as "I" beams. H beams on the other hand have flattened, leveled Flanges.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.