The welding arm is the most crucial part of welding work. It can move horizontally on cross beam with the tool carriage and can also move up or down on the directional wheel. It is located under the welding beam and has the function to automatically track seams.




H Beam layout welding machines are not a single piece of equipment. The machine is made up of many parts that have different features and functions. Many Beam layout welding machine suppliers and manufacturers use a variety materials to make their h beams. The vast majority of H beam welding machines are made of different types of steel.

Beam Layout Welding Under Microscope


If it is still in this position, you can stand at the plywood's middle. It might be impossible to do so, as it may break. To give it extra strength and support, place a single piece of Styrofoam underneath the plywood, and another piece below that.

Beam Layout Welding Under Microscope
Beam Layout Welding Energy

Beam Layout Welding Energy


The underside of the H beam is equipped with a solid base that holds the metal plate and the weld heads pass through it. Here the flanges for the H beam are formed and cut. Next, web is formed from a long plate. The web is loaded onto a conveyor belt with the flanges.

What is a beam plate


Beam Layout Welding has a combination of a trolley and a vertical platform.

Built Up Steel Beam Design Example

Built Up Steel Beam Design Example





You can weld the sides fuse onto the roll and attach the flanges to your center web. Most cases, the flanges have been double-joined to ensure a stronger and safer weld onto web.

Beam Layout Welding Rod Chart


Beam Layout Welding can be used to join web sections using a 100% welded seam, to make long webs from shorter sections, or to join sections with different thicknesses. The pieces are placed against an edge guide, and then clamped together using air cylinders. The joint's lower side is held in place by the grooved copper backup plate. The welding head moves along the joint and weaves it using a single-wire submerged arc.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.