Beam Layout Welding Device

Beam Layout Welding Numerical Simulation


Ask us to design the exact Beam layout welding machine you need with the support of our Research & Development Team (R&D). If you believe it is feasible, please let us know. We'll then get back to the you with our findings. Our engineering team is available to assist and help with any questions. Contact us now for a quote for equipment and products!



The gantry frame is made up of the walking beams and columns as well as the upper platform. Each walking beam is driven by a motor reduction, which creates a dual-drive system. It makes the operation reliable and smooth. There are rails or racks on the platform that can be used as a support for the welding arms and tool carriages. The platform can accommodate two sets each of flux recovery machines and wires.

Pressure Vessel


The underside of the H beam is equipped with a solid base that holds the metal plate and the weld heads pass through it. Here the flanges for the H beam are formed and cut. Next, web is formed from a long plate. The web is loaded onto a conveyor belt with the flanges.

Pressure Vessel
Beam Layout Welding Mech4study

Beam Layout Welding Mech4study





Welding or bolting are the most common methods of achieving this. The connection would be made from the underside of each flange or web. You could join them to improve or increase the strength of the support, or for it be possible to cover more components.

Beam Layout Welding Processes




D3-Touch by Welding Alloys, a touch screen-based control technology for automation that allows efficient and effective implementation of fully automated weld techniques and processes, is available. Welding Alloys introduces new technology to all Welding Alloys machine, improving performance as well as accuracy. This technology works in conjunction with precision engineering mechanics to ensure maximum performance from our welding machines.

Beam Splice Connection

Beam Splice Connection



The beam's strength will usually be determined by the web. It is the area at the center or height of the beam. Therefore, H beams will be stronger as they are thicker than H beams. However, I beams have greater flange resistence than H beams.

What is a plinth beam


If it is still in this position, you can stand at the plywood's middle. It might be impossible to do so, as it may break. To give it extra strength and support, place a single piece of Styrofoam underneath the plywood, and another piece below that.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.