Beam Layout Welding Heat Source

Beam Layout Welding Unit



The WS-72 web-seamer station has a Lincoln Power Wave AC/DC welding machine and Max-Sa controls. Unique magnets pull web plates to the copper backing-up bar. Copper back-up bars are designed with a small flux groove that is fixed into an aluminum water-cooled bar.



They are generally thinner than H beams when it comes to the web, the center structure or the height I beams. The web is thinner than H beams because the top and bottom flanges of an H beam are farther apart. I beams have flanges that are shorter and narrower.

Beam Layout Welding Connecticut





A wire feeding device is a device that connects wire feeder with wire reel using wire feeding tube. Wire reel supporter allows you to fix wire reel. You can place the wire reel into it before welding. Next, connect the wire thrill to the feeding machine by making use of the feeding pipe.

Beam Layout Welding Connecticut
Laser Beam

Laser Beam



The flanges will be welded onto the center-web by welding the heads of the side fuse as it rolls in a certain direction. Double-joined flanges make it easier to attach the web to the web.

What is difference between WPS and PQR


A typical Beam Layout welding system has 18 conveyor segments. Six of the sections are motorized, and drive the rollers with sprockets. Ten are motorized, and connected by chains to adjoining motorized sections. Two are inactive.

Beam Layout Welding Wheel

Beam Layout Welding Wheel



Gulf States Saw & Machinery Co takes a progressive approach in solving the unique problems faced by our industry. They provide efficient design and fabrication as well as timely delivery of custom-made equipment.

Which kind of structural weld is the strongest





The walking beams, columns and the upper platform form the gantry frame. The motor reducer drives each of the walking beams, creating a double-drive system that makes operation easy and reliable. Rails and racks are located on the platform's front. They can be used for welding arms or tool carriages to move. Two sets of flux and wire recovery machines can also be placed on the platform.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.