H Beam layout is more than just one machine. It is comprised of many parts with different functions and features. Beam layout suppliers and manufacturers can use a wide range of materials to make their beams. Most H beam welding equipment are made from different types and grades of steel.
The best part is that Gulf States Saw & Machine Company will provide onsite analysis at no cost! For more information or to schedule an appointment with one of our Sales Engineers on-site, call 1-800-635-7777. We'll be glad to assist you. You can see the video library that we have made below. This video library was made possible by metal fabrication techniques and metal builders.
Beam Layout Welding can be downloaded remotely from any connected PC or network. It includes a one day data logger to record the machine's operations. This option allows for beams of maximum size 84" rather than the standard 72". All elements are modified to accommodate larger web size.
The flanges for an H beam have a thicker flange, which is why they are used in applications that require it to support larger and heavier weights. Aside from that, the flanges for I beams have an inclined - this helped in its designation as an "I” beam. H beams, however, have flattened-out, leveled edges.
The Beam Layout Welding has an electrical control panel that allows maximum system flexibility. You can choose to operate the welder in manual mode or automatic mode. Individual controls located on the control panel can be used to determine the sequence of operations. Also, each controller has its own welding parameters.
FRANKLIN MODEL PTW72 is a complete Automatic Submerged Twin-arc Welding System. It can fixture and weld three-piece built-up beams made up of a web, two flanges and a web. The PTW-72 can hold 72 inches of web and has flange capacities up to 20 inches wide x 1 inch thick. The length of a complete PTW72 fabricating cell is up to 300 ft. It includes a web loading gantry with web seam station, tackstation unit, 4020 CNC Flange Loading Gantry, and a PTW72 Pull Thru welder with CNC controls.
This is typically done by welding or bolting. The connection would take place under each of the flanges, webs, and/or bevel. The purpose of joining them is to increase or decrease the support range and strength, or to allow it to cover a wider array of components or parts.
A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.