The WS-72 web-seamer station has a Lincoln Power Wave AC/DC welding machine and Max-Sa controls. Unique magnets pull web plates to the copper backing-up bar. Copper back-up bars are designed with a small flux groove that is fixed into an aluminum water-cooled bar.





The walking beams, columns and the upper platform form the gantry frame. The motor reducer drives each of the walking beams, creating a double-drive system that makes operation easy and reliable. Rails and racks are located on the platform's front. They can be used for welding arms or tool carriages to move. Two sets of flux and wire recovery machines can also be placed on the platform.

What is HSS beam



On the opposite ends of the web, the two flanges are placed on a conveyor section. They are then rotated to the vertical position and held in place by magnetic guide rollers. The three pieces are moved against a retractable stop, and hydraulically clamped in the correct relative positions. They are manually joined by the operator. The clamps are removed and the tack-welded beam sent to the welder. After setting the clamp positions for the first beam is done, the operator can control material movement using the control panel for any subsequent beams of the same dimensions.

What is HSS beam
Beam Layout Welding Hybrid

Beam Layout Welding Hybrid



Gulf States Saw & Machinery Co takes a progressive approach in solving the unique problems faced by our industry. They provide efficient design and fabrication as well as timely delivery of custom-made equipment.

Beam Layout Welding For Beginners


A typical Beam Layout welding system has 18 conveyor segments. Six of the sections are motorized, and drive the rollers with sprockets. Ten are motorized, and connected by chains to adjoining motorized sections. Two are inactive.

What is beam column joint

What is beam column joint



They are generally thinner than H beams when it comes to the web, the center structure or the height I beams. The web is thinner than H beams because the top and bottom flanges of an H beam are farther apart. I beams have flanges that are shorter and narrower.

Section


Incepted in 1984, in Tampa, FL, Gulf States Saw & Machine Company was formed with the aim of assisting clients get superior products in the cut-throat metal fabrication sector. CMT’s operations progressively expanded to service the entire south with additional showrooms in Atlanta, GA, and Dallas, TX. Capital’s presence is now felt in 12 states, namely, Florida, South Carolina, Virginia, Mississippi, Tennessee, Texas, Georgia, North Carolina, Alabama, Louisiana, Oklahoma, and Arkansas.

Frequently Asked Questions

A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.