The two flanges, which are located on the conveyor section opposite each other of the web's web, are rotated into vertical position by magnetic guide rollings. The three pieces can be moved to the right position by a hydraulic clamp. The operator manually joins them. The clamps can be released and the tack welded beam is sent to the welding station. After the initial adjustment of the clamp positions in the first beam beam, the operator controls all material movement through the control panel.
Beam Layout Welding has easily accessible diagnostics indicators and message display. Custom graphics include electrical and hydraulic diagrams, and functional and functional diagrams. You can input program information via touch screen, keyboard or touch screen.
We have years of experience across many industries and a broad range of technology. This means we can help anyone, from small jobs shops to multinational companies, to use the most up-to-date equipment and technology. We can design, specify and install any type of metal fabrication equipment.
Each section can carry approximately 4,000 pounds of load. To reduce friction between the turning beam and the slower moving beam at the welder's entrance, conveyor speeds can be synchronized with the input speed of the welder.
Gulf States Saw & Machinery Co is a forward-thinking company that solves the unique problems in our industry. It provides efficient design, fabrication, timely delivery and maintenance of custom equipment.
It is fitted with a solid underneath that holds the plate of metal while the weldheads go through it. Here are the flanges that make up the H beam. The web is made using a long piece from plate. It is loaded onto a conveyor belt-like welder roller along with the Flanges.
The WS-72 is equipped with a Lincoln Power Wave AC/DC helder and Max-Sa controls. The WS-72 is equipped with unique magnets that pull web plates to copper back-up bars. The copper back up bar is made with a small flux groove. It is then fixed to an aluminum water-cooled subbar.
A welded beam consists of three individual sections of steel – a web, a top flange and a bottom flange. These segments are merged together with deep fillet welds to create an incredibly robust building material.